Turn signal question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • grlaneriejr
    Grease Monkey
    • Oct 2003
    • 321

    #1

    Turn signal question

    Hey guys, I got a problem.

    At lunch today, my driver side signals won't work. Even the light in the dash won't blink. Anyone know what's up? The passenger side works fine.

    Thanks
  • kencopperwheat
    King of Kegstands
    • Oct 2003
    • 14396

    #2
    Reach behind the bumper and make sure that the plug on the rear is snug on the turn signal housing.
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment

    • James Crivellone
      Head Janitor
      • Oct 2003
      • 6301

      #3
      Check all Fuses, also check the harness that runs to the Turn Signal Switch, and verify the relay is nice and tight

      Comment

      • e30evolution
        West Werks
        • Oct 2003
        • 1888

        #4
        Originally posted by James Crivellone
        Check all Fuses, also check the harness that runs to the Turn Signal Switch, and verify the relay is nice and tight
        :up: if the plug on the light was loose it wouldnt stop the dash indicator from working

        http://www.westwerksauto.com

        Comment

        • grlaneriejr
          Grease Monkey
          • Oct 2003
          • 321

          #5
          The dash indicator doesn't work, and neither do the lights on the outside of the car. Just the driver's side.

          Would the relay affect this? Where is the relay located?

          Comment

          • M-technik-3
            I waste 90% of my day here and all I got was this stupid title
            • Oct 2003
            • 18946

            #6
            Do your hazards work? yes check other issues if not repace bulbs check for corrosion.
            https://www.facebook.com/BentOverRacing

            Comment

            • grlaneriejr
              Grease Monkey
              • Oct 2003
              • 321

              #7
              I will check them in a little bit. didn't think to check them


              edit:

              just checked hazards. they do not work on either side. I'll check bulbs tonight.

              Comment

              • grlaneriejr
                Grease Monkey
                • Oct 2003
                • 321

                #8
                Just changed bulbs, fuse. Still no signals on driver's side.

                Relay maybe? is it under the dash or in the engine compartment?

                HELP!

                Comment

                • James Crivellone
                  Head Janitor
                  • Oct 2003
                  • 6301

                  #9
                  Check the connector that goes into the back of the Hazard Switch, also check the Turn Signal Swith harness as I said earlier =)

                  Comment

                  • grlaneriejr
                    Grease Monkey
                    • Oct 2003
                    • 321

                    #10
                    okay. i will check that tonight. thanx

                    Comment

                    Working...