Well, for the most part, I still need a muffler... I used 2 3" mandrel U Bends, 8 feet of straight pipe, and one flex joint on the down pipe. I used the o2 sensor bung from my old exhuast, as well as hangers. It pieced together pretty nicely, a little lower than 2.5" but i can handle that. I did all of the welding myself with a crappy flux-core wire feed...
The reason I did this is because my catalytic converter was clogged on my old setup, which was killin exhaust flow. This setup will flow SOO much more than 2.5" (about 70% to be exact).
$45 for 3 3" mandrel U bends
$32 for 8 feet of straight pipe
$20 for the flex joint
about 8 hours off and on.
matt
The reason I did this is because my catalytic converter was clogged on my old setup, which was killin exhaust flow. This setup will flow SOO much more than 2.5" (about 70% to be exact).
$45 for 3 3" mandrel U bends
$32 for 8 feet of straight pipe
$20 for the flex joint
about 8 hours off and on.
matt
Comment