Labor cost on Crankshaft position sensor?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • EvoStevo
    Advanced Member
    • Dec 2007
    • 173

    #16
    sweet. I found it. It was going to the oil level sender. Thanks for all your help, guys. You saved me a shit ton of money, I suspect.

    Comment

    • EvoStevo
      Advanced Member
      • Dec 2007
      • 173

      #17
      so it still doesn't start up every time. What else could be wrong?

      Comment

      • e30this
        No R3VLimiter
        • Dec 2007
        • 3580

        #18
        fuel pump or coolant temp sensor.

        Comment

        • EvoStevo
          Advanced Member
          • Dec 2007
          • 173

          #19
          how does the coolant temp sensor affect start up? and thanks for putting up with all my noob questions.

          Comment

          • nando
            Moderator
            • Nov 2003
            • 34827

            #20
            coolant sensor = cold start enrichment

            basically, if it's dead your mixture will be way, waaay off.
            Build thread

            Bimmerlabs

            Comment

            • EvoStevo
              Advanced Member
              • Dec 2007
              • 173

              #21
              oh jeez, is that why I've been running so rich this whole time?

              Comment

              • nando
                Moderator
                • Nov 2003
                • 34827

                #22
                it's a cheap part, I would just replace it and see what happens.
                Build thread

                Bimmerlabs

                Comment

                • e30this
                  No R3VLimiter
                  • Dec 2007
                  • 3580

                  #23
                  Originally posted by nando
                  it's a cheap part, I would just replace it and see what happens.
                  actually its about 3.67 at auto zone :)

                  Comment

                  • EvoStevo
                    Advanced Member
                    • Dec 2007
                    • 173

                    #24
                    would you really recommend autozone parts? If so, which brand (Duralast, GP Sorenson, etc.)? I used to work there, so I could probably even get a discount. If you were just joking, pelican's prices are good enough for me.

                    Comment

                    Working...