If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ok this weekend i installed a new dash and ever since my gas Gauge stopped working , i checked it with 3 other ones , what do i need to look at next?
Thanks.
I did the same thing but now my speedometer doesn't work. Are you sure you hooked all the wires back up or didn't forget some? I'm finding that I did and its sucks. They came undone while I was removing things and since I never took them off myself or noticed them, they were never labeled or taken inventory of. Sucks :(
Explain your situation better.
Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
Yes i have two cars here and 4 clusters , in the other car it works fine , in the one car it dose not , it was working befor and i checked all the plugs to make shure i hocked everything back up and its all there. i dont know if there is a relay or if i need to go to the pump and check the float so im checking to see if anyone had this problem.
Comment