Announcement

Collapse
No announcement yet.

M20 AFM ON THE M10 IS IT POSSIBLE?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M20 AFM ON THE M10 IS IT POSSIBLE?

    is it possible to use a 90 325i AFM on my m10 motor. and should i expect any gains?

    www.stancefactory.com

    #2
    no, hence no
    Tenured Automotive Service Professional - Avid BMW Enthusiast

    Vapor Honing & E30 ABS Pump Refurbishment Service
    https://mtechniqueabs.com/

    Comment


      #3
      details y no?/ can u tell me y it isnt possible..explain

      www.stancefactory.com

      Comment


        #4
        A m10 uses Bosch L-Jetronic for starters, where as a m20 is Bosch Motronic 1.1-1.3.
        I'm not sure if the plug connectors are the same, but even if it does physically plug in, it won't work properly.
        Tenured Automotive Service Professional - Avid BMW Enthusiast

        Vapor Honing & E30 ABS Pump Refurbishment Service
        https://mtechniqueabs.com/

        Comment


          #5
          the connectors r the same. ill try it tommorow and let u know. ..i know am hard headed

          www.stancefactory.com

          Comment


            #6
            Originally posted by ZiMMie
            ill try it tommorow and let u know. ..
            Yeah, have fun with that. :roll:
            Tenured Automotive Service Professional - Avid BMW Enthusiast

            Vapor Honing & E30 ABS Pump Refurbishment Service
            https://mtechniqueabs.com/

            Comment


              #7
              lol. the car might work better without a sensor plugged in at all.
              Michael Spiegle

              '01 Ford Escape / Daily Driver
              '99 M3 / Track Car
              '87 325is bronzit / wtf car
              '06 Daytona Triumph 675 / Daily Rider

              Comment


                #8
                The earlier ETA Versions may function, the later 325i ones will not

                Comment


                  #9
                  Originally posted by Jordan
                  A m10 uses Bosch L-Jetronic for starters, where as a m20 is Bosch Motronic 1.1-1.3.
                  I'm not sure if the plug connectors are the same, but even if it does physically plug in, it won't work properly.
                  320 pre facelift uses L-Jet - so does the 323. You could always try with one of them.

                  They will give the wrong readings however and won't work - could always try transfer the electronics if the AFM is larger - even then the TB will be smaller. So it really isn't worth it.

                  I doubt little mods like that will see the M10 crack 45 wheel kW

                  Comment


                    #10
                    Originally posted by ZiMMie
                    the connectors r the same. ill try it tommorow and let u know. ..i know am hard headed
                    Do it, it's going to give you like 30hp dude :roll:

                    RISING EDGE

                    Let's drive fast and have fun.

                    Comment

                    Working...
                    X