Announcement

Collapse
No announcement yet.

How to get new transmission oil in?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How to get new transmission oil in?

    I figured that I would just use a tiny funnel, but even the little one I had won't fit. Does anyone have any bright ideas? My next guess is to make a little funnel out of paper, and transfer the oil to a small bottle, and pour that in. But it looks like a pain no matter how I do it.

    #2
    The easiest way is to pick up a fluid pump from the local auto parts store. I got mine for about $12, its a headache saver.

    Comment


      #3
      On my diff. I just used a pump (found at local parts store). It screwed on to the oil container and pumps the oil in through a tube.

      Aaron

      Comment


        #4
        Re: How to get new transmission oil in?

        Originally posted by chrisd
        I figured that I would just use a tiny funnel, but even the little one I had won't fit. Does anyone have any bright ideas? My next guess is to make a little funnel out of paper, and transfer the oil to a small bottle, and pour that in. But it looks like a pain no matter how I do it.
        You can get one of those pumps that screw into the gear oil bottles (as mentioned already) OR you can use a 4 ft piece of hose, large fuel line or small heater hose- whatever will fit in the hole....run the hose down thru the engine compartment, close to the firewall, and stick the end in the tranny- then use a funnel in the end of the hose and pour in the gear oil.

        Bret.

        Comment


          #5
          Thank you all, I went and got a pump.

          Comment


            #6
            come on guys, keep it clean.
            Cam .W '91 325is

            Spaz's 1991 Alpine White???? S52 Build Thread...

            Comment

            Working...
            X