I figured that I would just use a tiny funnel, but even the little one I had won't fit. Does anyone have any bright ideas? My next guess is to make a little funnel out of paper, and transfer the oil to a small bottle, and pour that in. But it looks like a pain no matter how I do it.
How to get new transmission oil in?
Collapse
X
-
On my diff. I just used a pump (found at local parts store). It screwed on to the oil container and pumps the oil in through a tube.
AaronComment
-
Re: How to get new transmission oil in?
You can get one of those pumps that screw into the gear oil bottles (as mentioned already) OR you can use a 4 ft piece of hose, large fuel line or small heater hose- whatever will fit in the hole....run the hose down thru the engine compartment, close to the firewall, and stick the end in the tranny- then use a funnel in the end of the hose and pour in the gear oil.Originally posted by chrisdI figured that I would just use a tiny funnel, but even the little one I had won't fit. Does anyone have any bright ideas? My next guess is to make a little funnel out of paper, and transfer the oil to a small bottle, and pour that in. But it looks like a pain no matter how I do it.
Bret.Comment
-
Thank you all, I went and got a pump.
Comment
-
Comment



Comment