Post moved from general discussion (admins, mods - apologies)
Hi Guys,
i am a new member, so if i missed this post somewhere (although i was looking for it), please forgive me.
I need your support with some parts of the frame rail.
I've put my car on the rotisserie and tried to remove to front subframe (the bolts were heated), 2 our of 4 broke off instantly. I used an impact gun set to low.
So, anyways, two three hours of drilling and snapping the easy out, managed to remove this bastard. now, im trying to get the information on how does this bracket/weldnut look like and which material (type of steel)
I don't want to cut mine until i get a new set (both sides will be replaced).
Same goes for the control arm lollipop mounts, one bolt broke off, but manager to weld a nut and undo the bolt.i will also be replacing these, both sides.
So please gents, post pics, dimensions etc. and sorry for my bad english...
thanks in advance
Hi Guys,
i am a new member, so if i missed this post somewhere (although i was looking for it), please forgive me.
I need your support with some parts of the frame rail.
I've put my car on the rotisserie and tried to remove to front subframe (the bolts were heated), 2 our of 4 broke off instantly. I used an impact gun set to low.
So, anyways, two three hours of drilling and snapping the easy out, managed to remove this bastard. now, im trying to get the information on how does this bracket/weldnut look like and which material (type of steel)
I don't want to cut mine until i get a new set (both sides will be replaced).
Same goes for the control arm lollipop mounts, one bolt broke off, but manager to weld a nut and undo the bolt.i will also be replacing these, both sides.
So please gents, post pics, dimensions etc. and sorry for my bad english...
thanks in advance
Comment