I have been researching :bow:tEh fiVe LugZ for some time now. This has been a very helpful guide so far (http://www.torque-bound.com/5-lug.htm) except I have a question, which I believe is not mentioned in the write up. What hubs do I need to use? I'm assuming 96-99 E36 M3 hubs, but can I use regular E36 hubs or is there even a difference? I just bought 96-99 E36 M3 spindles and I need to buy the hubs next.

Also, I was wondering if I can use regular E36/pre 96 E36 M3 control arms with the offset bushings, the eyeball arms from http://www.treehouseracing.com and caster/camber plates? Would this combination improve the caster enough to work correctly/center wheels? Anyone try this? I know people use regular E36 control arms with caster/camber plates to improve caster enough so wheels/tires don't rub, but with all this how close would wheels be to center? Thanks!