e30 M3 hubs to e30 325is car.

[Ceeker]

ok, This may or may not have been answered. Sorry, but I am not about to go through hoards of pages and cause rapid aging while doing this..!!!

I know the e30 m3 5 lug rear hub can be pressed directly into the trailing arm of the e30 325 models.

Can the front e30 m3 hub be pressed into the front 325 strut without doing an modifications? I would suspect not.

I am willing to buy two front hubs and machine them down in order to fit the strut. Can this be done and will replacing the brake carriers and calipers be required?

All help would be appreciated and do apologize if this is a repeat post.

thx- ernie

[monty23psk]

Staight bolt on = no. With modification it might but thenyou might take away from the strength. Only way to know is to try.