my front setup
96m3 control arm, ie 25mm sway bar ,95 m3 strut housing
whats going on guys so im finishing up my 5 lug swap and i was trying to figure this out and i got stumped. in the diagram, look at #6 and #7. with the ie sway bars came the end links. so i put one end into the control arm and the other into one of the 3 slots for the sway bar. now my question is i know stock on m3's the #6 endlink attaches to the strut housing and into the sway bar, but what goes on with the #7 one?
Comment