clavinZERO's 5-lug swap with *PICS* and details galore!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bimmer630
    replied
    Nice writeup, man. Im trying to gather up the parts to do this on my '89. A guy I know has e36 (non-m) front struts with spindles hubs and brakes which I will be getting for nearly nothing. I know the rear is just 6cyl z3 hubs, bearings, brakes (you dont need new trailing arms)
    But are the M3 front arms essential? i already have the offset bushings on my car, and i cross referenced the e36 control arm against the e30 arm, and they seem to have the same part numbers. of course the m3 arm should have different geometry, but will that work with a non-m strut/spindle setup?
    i'll have to go back to your original post and re-read...did you use M struts?

    BTW your car looks killer! I havent come across any others dealing with this abs issue you are having, maybe you can just get a set of Z3 rear axles, do they have the same pulse gear as an e36 front?

    Leave a comment:


  • Money$hit
    replied
    Ah, gotcha. Makes sense now.

    Leave a comment:


  • clavinZERO
    replied
    I did, then scraped clean the friction surfaces...

    When you look past my wheels at the rotors, they are clean and black in the "hat" area instead of rusty.

    Leave a comment:


  • Money$hit
    replied
    Did you spray paint your rotors? Did I miss something?

    Leave a comment:


  • clavinZERO
    replied
    Well... I don't have over heating problems yet, but if I did, caliper color would not be my solution. Better cooling ducts would be, but that is fuhraze.

    Thanks for the color argumentation/input anyways guys.

    Leave a comment:


  • robspeed325i
    replied
    Originally posted by bmwpower
    From the rotor and anything else it's in contact with. I was going with the idea that black retains heat more and therefore would be hotter longer when compared to a silver caliper after a similar braking test.

    AYA DUH the rotor!! (that is aimed at myself fyi. ;))

    i was thinking of the brakes as a single system. anyway google the subject and you'll find out that black also radiates heat the best. there is no isolating the caliper from rotor heat mechanically, that is how you boil the fluid. the best you can hope for is to cool it better via either leaving it naked or going black. imo, anyway. ;)

    Leave a comment:


  • clavinZERO
    replied
    I do like the look of the black, but that pic is of a wilwood caliper - which just looks super sweet in and of itself, regardless of color, hehe. A much cleaner, techie looking piece.

    Leave a comment:


  • bmwpower
    replied
    Originally posted by robspeed325i
    LOL where would it absorb heat from? You happen to be right, but wrong. Black absorbs, *AND* radiates heat, the best. naked silver aluminum (no paint) might be best, but IF youre going to paint, go black!
    From the rotor and anything else it's in contact with. I was going with the idea that black retains heat more and therefore would be hotter longer when compared to a silver caliper after a similar braking test.

    Leave a comment:


  • robspeed325i
    replied
    Originally posted by bmwpower
    Black absorbs heat. Silver would be better for heat dissipation.
    LOL where would it absorb heat from? You happen to be right, but wrong. Black absorbs, *AND* radiates heat, the best. naked silver aluminum (no paint) might be best, but IF youre going to paint, go black!

    Leave a comment:


  • bmwpower
    replied
    Originally posted by robspeed325i
    IMO, wilwood has it right with BLACK calipers... for heat dissipation. :)
    Black absorbs heat. Silver would be better for heat dissipation.

    Leave a comment:


  • robspeed325i
    replied
    IMO, wilwood has it right with BLACK calipers... for heat dissipation. :)

    Leave a comment:


  • clavinZERO
    replied
    well then call me homo!

    actually... I thought about switching to silver. We shall see.

    Leave a comment:


  • robspeed325i
    replied
    calipers painted red = you are gay. sorry to be the one to tell you this. ;-p

    Leave a comment:


  • madformx5
    replied
    Calvin you have a sweet car with or without the five lug swap. Great job on the swap though. I will not have your ABS problem though because my 1990 iS did not come with it.

    Leave a comment:


  • clavinZERO
    replied
    Originally posted by btec116
    Awesome, that sounds good. Aiming for 2deg neg on a street setup would be sweet!

    I've always been thinking about the 5-lug, its so tempting. Good to see others do it so well!
    :D

    Leave a comment:

Working...