clavinZERO's 5-lug swap with *PICS* and details galore!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • clavinZERO
    replied
    Originally posted by var1ant
    How's the abs problem?
    Still undiagnosed. I have been too lazy / busy to get in there and check the wiring out again. I have only locked them once so... I am not too worried about not having it. But still, not having the ABS dash light come on intermittently would be nice. I'll post up when it's sorted out... like wiring colors for the sensors and such.

    Leave a comment:


  • var1ant
    replied
    How's the abs problem?

    Leave a comment:


  • panma555
    replied
    Oh !!!!! my God

    Leave a comment:


  • makaio
    replied
    Very nice!

    Leave a comment:


  • clavinZERO
    replied
    Originally posted by SchnellerVert
    Can I see a side profile with the style 32 wheels.
    sure:
    (any excuse to shoot the car is nice :P)







    Leave a comment:


  • clavinZERO
    replied
    The Z3 rear arms were 150 each from Bavarian Auto Recycling. Their calipers were 50 each. Plus shipping, naturally.

    Leave a comment:


  • 2002maniac
    replied
    great writeup! Would you mind sharing where you sourced the trailing arms and how much they set you back?

    Leave a comment:


  • clavinZERO
    replied
    Jordan, that's what I did, but I wired the E36 stuff to the front... I have e36 front sensors and e36 front ABS pusle rings, and e30 rear sensors and e30 rear ABS pulse rings. My light still comes on intermittently... so I still need to figure things out. I know yours (Jordan) had matched pulse rings front and rear... but what about your sensors? All e30 or mixed like mine?

    Leave a comment:


  • Jordan
    replied
    I spaced my rear e30 sensors off the MZ3 trailing arm with copper crush washers and a longer allen bolt. Worked perfectly.

    Leave a comment:


  • SchnellerVert
    replied
    Can I see a side profile with the style 32 wheels.

    Leave a comment:


  • clavinZERO
    replied
    was he running E30 sensors/axles on Z3 rear with E36 sensors on E36 fronts like me?

    thx for the additional input man.

    Leave a comment:


  • PiercedE30
    replied
    Get a scope, put it on each wheel sensor and make sure all the sensors put out the same signal by spacing everything with washers. That's how my co-worker did his. He said the rears are super sensitive, while the fronts aren't. But that thing did brake a WHOLE lot better than it did before, even improved the ABS functionalities.

    Leave a comment:


  • clavinZERO
    replied
    BUMP for...

    ANYONE GOT ABS INFO TO SHARE?

    kthx.

    Leave a comment:


  • clavinZERO
    replied
    the nuts are already that funky squished "locking" kind... I just think it wasn't tightened at the alignment shop. But I will look into that Tony.

    Leave a comment:


  • tonytony
    replied
    use the paste thread lockers, works much better than the liquid/gel type.

    Leave a comment:

Working...