Acura Big Brakes on the E30!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • NC325iC
    replied
    i hope there were more steps than that, like measuring, and i hope the drilling took place on an end mill.

    if no to both of those, R3v thread coming soon

    "my brakes fell off..."

    Leave a comment:


  • Holland
    replied
    Originally posted by chau
    on such a light car, don't you run the risk of the wheels locking up under braking? Without the abs that is.
    That's not what my brakes told me the other week.

    Leave a comment:


  • Wh33lhop
    replied
    Originally posted by chau
    on such a light car, don't you run the risk of the wheels locking up under braking? Without the abs that is.
    Think about what you just said.

    Now go sit in the corner.

    Leave a comment:


  • !kid
    replied
    i would not use aluminum for brackets for fear of cracking just my 2 cents

    Leave a comment:


  • chau
    replied
    on such a light car, don't you run the risk of the wheels locking up under braking? Without the abs that is.

    Leave a comment:


  • Hellabad
    replied
    See if you can bolt on the caliper from an Accord with ABS. It might bolt right up, and uses a huge pad.

    Jay from GC

    Leave a comment:


  • White325is
    replied
    Originally posted by kishg
    why did you need bigger brakes?
    To stop them bigger wheels yo.

    Leave a comment:


  • kishg
    replied
    why did you need bigger brakes?

    Leave a comment:


  • b*saint
    replied
    Integra brakes arent that big tho.

    Leave a comment:


  • OneNutBandit
    started a topic Acura Big Brakes on the E30!!!

    Acura Big Brakes on the E30!!!

    Just got done putting on a set of 94-00 acura integra calipers and 11" AEM Slotted Rotors.
    Why?
    Bigger Aluminum calipers, bigger piston, weigh half of the origonals, and cheaper and bigger pads.

    Now to pics.

    First had to grind just a little to fit the hub.


    test fit of the rotor.


    Acura Caliper with the brackets that came with rotors.


    Had to weld on some more aluminum to reach the hub.


    Drilled and tapped the brackets to bolt on!


    All together with Caliper and Rotor. Oh and the Bmw brake line threads right into the Acura caliper.


    Wheel on and they fit perfect. Oh i had to grind on the knuckler of the Steering arm about an 1/8 of and inch to clear rotor, nothing major.


    All together on this i spent..........30 bucks for the calipers at the junk yard! I had the rotors and brackets laying around that a friend gave me.
    They work amazing. Firm but not too firm pedal, and not touchy, if you want more brake, you just push on the pedal more without it suddenly locking up. Love them.
Working...