I have a nice set of 4x108 mesh wheels, was thinking about redrilling my 91 318 hubs to 4x108 , has anyone tried, i assume theres enough material to do it.
Announcement
Collapse
No announcement yet.
redrilling hubs to 4x108
Collapse
X
-
I know that 5x120 is too wide a pcd to fit on the hubs, 4x108 might fit though. The hub tapers towards the outside, so take a look at them and see if there is 4mm extra space towards the outside before it starts tapering. As long as there is, there's no problem.
You'll also need to get the rotors redrilled, and make sure that the centerbore of the wheel isn't smaller then 57.1. You also need to be sure that the offset is correct on the wheels and that they clear the caliper up front, otherwise you may either have a wheel that sticks out too far or one that requires spacers anyways.Byron
Leichtbau
Comment
Comment