Alrighty,
Only a couple days left till berlin klassik on sunday and my brakes are holding my car back (no pun intended). Im really hoping someone can make me look stupid and help fix the issue.
So, i bought the booster delete kit from MASSIVE brakes. Put everything together as the instructions told me to, no issues there.I had to make a couple new brake lines because of the new placement of the master cylinder. The 2 front lines were fully redone. The passenger front was ran through the tranny tunnel to hide it (shaved bay stuff). The drivers front was ran directly to the calliper. Now, the rear line originally was ran off the original prop valve which i just deleted hoping it would fix my issue. Still with no luck. I also just replaced the master with a brand new ATE master. And i bench bled it till there was no air.
Anyways, even with the new master i'm still getting ZERO pedal feel. Yet if i open the bleeder and slowly push the pedal it gushes out. Also if i pump the pedal and hold it it will gush out the rears but not so much the front.
If anyone can help me out that would be amazing, Im basically ready to try anything.
Thanks
Only a couple days left till berlin klassik on sunday and my brakes are holding my car back (no pun intended). Im really hoping someone can make me look stupid and help fix the issue.
So, i bought the booster delete kit from MASSIVE brakes. Put everything together as the instructions told me to, no issues there.I had to make a couple new brake lines because of the new placement of the master cylinder. The 2 front lines were fully redone. The passenger front was ran through the tranny tunnel to hide it (shaved bay stuff). The drivers front was ran directly to the calliper. Now, the rear line originally was ran off the original prop valve which i just deleted hoping it would fix my issue. Still with no luck. I also just replaced the master with a brand new ATE master. And i bench bled it till there was no air.
Anyways, even with the new master i'm still getting ZERO pedal feel. Yet if i open the bleeder and slowly push the pedal it gushes out. Also if i pump the pedal and hold it it will gush out the rears but not so much the front.
If anyone can help me out that would be amazing, Im basically ready to try anything.
Thanks
Comment