Subframe bracket install

[blatant]

Hi all,
Finishing up my swap with replacing the rtabs + subframe bushings. I have installed the subframe bushings and the associated 22mm nut with bracket. I am able to get one 6 mm Allen head bolt closest to the front of the engine in but I cannot get the second one in.

I tried manipulating the bracket, trying to get the aft most one in first, all with no luck. I would appreciate any suggestions on how to install both of them verse just the one.

I am using the akg 75d red bushings if that makes a difference.

Thanks for the help.

[blatant]

[ATTACH]87823[/ATTACH]

[36brua]

send pics to AKG ask them if you installed bushings correctly

[jeffnhiscars]

Loosen the 22mm nut so you have enough play to get the Allen bolts snug.

[blatant]

I tried loosening the 22mm nut, but didn't have any luck. I'll send AKG an email.

[SmokeE30]

iirc if the bushing is upside down or not all the way up inside it can do that.

[blatant]

I think it may not be all the way up. AKG got back to me and told me to jack the subframe all the way up, install the 2 fasteners and then the 22mm nut last. I'll double check to see if the subframe is all the way up, but I feel the picture posted shows it is.