Any one try to use Wilwood 2-pistons Dynapro #120-9689 or #120-9690 as a replacement for the stock rear calipers? I just bought the UUC BBK for the front and am trying to match something to the rear.
-
Current
99 328i (Sold)
91 318is M50B25TU
89 325ix (Parted out)
87 325is (Parted out)
95 525i (Parted Motor for 91 318is) -
What rotor would you use? If keeping the stock rotor, I would not expect much improvement.
-
whatever you choose, just be sure you got the proper brake bias.---E30 320i Hennarot 1984 Sedan---
Comment
-
Well I was planing on a stock rear rotor.Current
99 328i (Sold)
91 318is M50B25TU
89 325ix (Parted out)
87 325is (Parted out)
95 525i (Parted Motor for 91 318is)Comment
-
Bumping this thread. I'm trying to find a replacement caliper that uses the stock rear rotor.My Garage
2001 Z3 2.5i Steel Gray/Black (Lexi)
1988 325ix Diamond Schwartz/Black (Izzy)
1989 325i Cirrus Blue/Houndstooth (Stitch)
Feedback
Instagram: Stone.HopkinsComment
-
Try finding a 280x20mm rotor for better heat management
Then fit Wilwood part # 120-9706Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
Comment