E30 Front Brakes Removal and Replacement DIY

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • richardb
    R3VLimited
    • Mar 2009
    • 2121

    #1

    E30 Front Brakes Removal and Replacement DIY



    Last edited by richardb; 03-22-2018, 05:14 PM.
    Transaction Feedback!
  • agent
    Vice Grand Pubaa
    • Mar 2010
    • 7960

    #2
    The FAQ/DIY section is for staff-approved instructional posts only. Please do not post there directly. If you don't know where to post, put it in General Technical and we'll move it to the appropriate subforum if necessary. Thanks in advance.
    Originally posted by kronus
    would be in depending on tip slant and tube size

    Comment

    • estoguy
      E30 Enthusiast
      • May 2013
      • 1087

      #3
      Good video! You should probably mention that you went from an ATE style caliper to a Girling. ;) I noticed when you started putting in the new caliper that they didn't match.
      Estoguy
      1986 BMW 325, Alpenweiss ~ "Elsa"

      Need a photographer, come visit my site: http://estoguy.wix.com/unique-perspectives

      Comment

      • richardb
        R3VLimited
        • Mar 2009
        • 2121

        #4
        No longer embedding, here's the link:

        Transaction Feedback!

        Comment

        • uturn
          E30 Modder
          • Dec 2010
          • 987

          #5
          Video falls a bit short because most rotors come with a protection film that has to be cleaned off with brake cleaner. I can see noobies wondering why their rotors are smoking. Also since you replaced calipers it doesn't pertain to you. For those just doing the brakes... pump the brakes to get the brake pads back on the rotor before you start the engine and move the car.

          Comment

          Working...