Massive BBK Wheel Fitment Guide

[Massive Lee]

Hawk HT10 - Street and track.

[digger]

So ive found the following pads for 7812 any others?

WILWOOD
CM, BP-40, BP-10, BP-20, POLY-A, POLY-B, POLY-E, POLY-H, POLY-Q

HAWK
HPS, HT-10, DTC-30, DTC-60, DTC-70, BLACK, BLUE

EBC
GREENSTUFF, RED STUFF, YELLOW STUFF

PORTERFIELD
R-4, R4-1, R4-S

CARBOTECH
1521, AX6, XP8, XP10, XP12, RP2, XP20, XP24

RAYBESTOS
ST-38, ST-41, ST-43, ST-45, ST-47


probably mentioned but MASSIVE 280mm kit fits 16" alpina and 15" OEM basketweaves with the 1mm supplied spacer

[burkey001]

BP10 also an option, the 20's just have a nicer feel when they get warm, IMO.

Don't buy the polymatrix E's (the only other street pad from Wilwood) as they squeal an awful lot. Currently have E's on the rear of my 318is. Noisy.

[digger]

BP20 your best bet. Work pretty good from cold. not too noisy

was so far thinking bp-10 if i used a wilwood compound, according them better when cold. not limiting myself to wilwood tho. stoptech street performance 309 does get some good reviews

[burkey001]

BP20 your best bet. Work pretty good from cold. not too noisy

[digger]

what pads are people using for the 280 street bbk? i'm looking for the best pad for a DD that gets used for spirited weekend drives, must have good initial aggressive bite when cold, low noise, dust don't care about, dont want them to use rotors excessively. something like the stock textars/jurids would be ideal

[FredK]

Would any parts from the 4x100 E30 kit be usable for a 5x120 E30 M3 setup, like the caliper adapters?

I know you've discontinued the 300x32 Rally kit for the E30 M3, but would like to retain 15" wheels if possible for next season.

Thank you,
-Fred

[Massive Lee]

Also, Lee, could you send me a PM with prices(CAD) of the 300x32 front and rear "installer" kits? (I'm assuming you are done with wilwood for good?)

You are correct. I no longer supply Wilwood components as dealing with them has proven to be very painfull. Looks like the good and knowledgeable staff has been assigned to very lucrative "government contracts" (well, army and governement car float) and that whatever is left is "working" for racers... I had very good relations for the East Coast main rep, but it was not enough to handle the West Coast staff...

Front 300x32mm Race install kit is $800.00cad (just add rotors and calipers)
Rear 300x32mm Race install kit is $600.00cad (just add rotors and calipers)
Optional steel handbrake rings for street cars for $250.00cad

Lee

[Northern]

I did some skimming of the thread, but before I buy new slalom wheels, does the TRM C1 15x8 (or any of the kosei 15x8 et20 tirerack wheels) fit with the 300x32 + Superlites "Race" kit?

Also, Lee, could you send me a PM with prices(CAD) of the 300x32 front and rear "installer" kits? (I'm assuming you are done with wilwood for good?)

[Massive Lee]

Wow. That's very, very nice, Thanks for sharing.

Lee

[burkey001]

BBS LM198 fit with a 20mm spacer. This brings the wheel to ET20, as it is a 17x7.5 ET40 from factory.

Clears the 300x32mm race kit (SL6R caliper)

[red911turbo]

I found them thru my own source...

I can get these at decent prices.....just pm me.....I can get them drop shipped to you....

57.1/et 20/ 4 x 100/15 x 8

Hey Joel! Got your message at the shop.

I actually ordered the wheels from Rimstock. They are the parent company to Team Dynamics and have a warehouse in California.

I don't use the car to daily and the pads are a bit noisy when cold. A couple good applications and they are quiet. It is hard to find matching pads for the Wilwood front and stock rear calipers. I have tried HPS's in the past and have not been a fan. Anyone else found a good combination?

[JRKOUPE]

I found them thru my own source...

I can get these at decent prices.....just pm me.....I can get them drop shipped to you....

57.1/et 20/ 4 x 100/15 x 8

[Wh33lhop]

I only see them specific to other cars so far

http://www.blackwatchracing.com/mobile/Product.aspx?id=142

looks like $900 plus some spacers (8s need at least 10mm) assuming the hub bore is correct

or... http://fiestast.net/threads/update-t...iesta-st.1182/

[JRKOUPE]

source for the 15 x 8 @ 200 per...