Massive BBK Wheel Fitment Guide

[Massive Lee]

Should I even ask if street or sport fit on Enkie 92's. 15x7 et20.

He, he. You just did.

As a rule of thumb, a wheel with wide dish has less clearance behind the spokes. Therefore, I would rule out the Sport kit as the Superlite calipers are quite wide, while the rotors are huge (for an e30). Please check with the 280mm x 22mm Street kit. That kit can be purchased with or without rotors. You can even buy your own Corrado discs and have them machined.

http://massivebrakes.com/files/profile_e30_318-325_front_280_22.pdf

[SkinnyVT]

I'm updating my statement aboud the TireRack 15x8's. The calipers required more fine tuning (grinding/filing) than was required to clear my other wheels but the TRM's do in fact fit.

[Massive Lee]

Yup. I saw that at Calabogie this weekend. It was great to see one of my "babies" being used on a track.

[SkinnyVT]

I am just as glad that your "babies" slowed me down in a hurry when necessary, it was a great weekend and the brakes performed flawlessly. I've had to adjust my driving now that I have brakes that I always have confidence in.

[drifty340i]

Does anyone no if the street kit will work with Keskin KT1 16x9s et15 with a 3mm spacer max? Ill print out the template this weekend and try but would be even better if anyone could tell me now

[Massive Lee]

Your best bet is to print the profile and test it against the back of your wheels. I will supply the 1.5mm or 3mm spacers at no extra cost

[Holland]

He, he. You just did.

As a rule of thumb, a wheel with wide dish has less clearance behind the spokes. Therefore, I would rule out the Sport kit as the Superlite calipers are quite wide, while the rotors are huge (for an e30). Please check with the 280mm x 22mm Street kit. That kit can be purchased with or without rotors. You can even buy your own Corrado discs and have them machined.

http://massivebrakes.com/files/profile_e30_318-325_front_280_22.pdf

It's funny you post that picture because those exact wheels are on my car now. I did get some Borbet B's (Mesh style) now that I'm waiting to put on until I drop it. 16x7.5 et 20 I'm assuming the 280mm kit will fit?

[Massive Lee]

16x7.5 et 20 - I'm assuming the 280mm kit will fit?

I have learned to never assume, but take measurements and double check

Download the profile and test against your wheels.

[drifty340i]

Your best bet is to print the profile and test it against the back of your wheels. I will supply the 1.5mm or 3mm spacers at no extra cost

Thanks will do mate, the only problem is i cant run anymore spacers as im only just off the guards already

[gverelli]

Also fit euroweaves.

[alexbaby88]

Also fit euroweaves.

15" ET24?

Are you on the 280mm Street kit?

Any spacers?

[Massive Lee]

I don't know what the wheels are exactly, but I suspect they could be 15" iX BBS wheels with perhaps some 18mm spacers. Giani?

[gverelli]

I don't know what the wheels are exactly, but I suspect they could be 15" iX BBS wheels with perhaps some 18mm spacers. Giani?

They are 15x7 et24 euroweaves. Fit perfect. Wouldnt be surprised if the higher kit fits also (Never tried with the printout but I would think it would fit.)

[g22]

Good news - I finally got my TR Motorsports e30M30 15X8 et20 wheels

Bad new - The wheels will not accomodate the sport kit. Hits by a few mm's..

[SkinnyVT]

Good news - I finally got my TR Motorsports e30M30 15X8 et20 wheels

Bad new - The wheels will not accomodate the sport kit. Hits by a few mm's..

The sport kit does fit with the TRM's, you just need to file/grind off the extra material on the ends of the caliper.