Installed new rotors and pads - vibration problem

[jlevie]

While possible, I'd say that the odds are that you don't have a warped Brembo rotor. I'd be more suspicious that the rotor isn't fully seated on the hub, you haven't bedded in the pads, you've managed to to get uneven pad deposits on the rotors, there are worn suspension parts, or that you have a tire/wheel problem.

[Nic01101011]

are you using the bolts that hold the rotors in place? Take the wheels off and make sure the rotors are seated right and everything it tight.

yea checked that lot several times, everythings tight and in place

[asubimmer]

are you using the bolts that hold the rotors in place? Take the wheels off and make sure the rotors are seated right and everything it tight.

[Nic01101011]

I installed new rotors and pads all around today, and under moderate to hard braking I feel a vibration, almost feels like ABS, and hear a thumping noise from the front right.

at first I thought it was the tire hitting the plastic fender liner, but that isn't it.

the rotors are Brembo blanks, quality I thought. what are the odds of getting a warped rotor from them?

any ideas?