Coilover help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • theox69
    E30 Mastermind
    • May 2008
    • 1732

    #1

    Coilover help!

    Hey,
    I recently installed some brand new coilovers and my car handles like a dream.
    Today, as I was driving, I suddenly heard a clunking in the rear passenger side. I pulled over to see what was going on and saw the following:

    Driver's Side(for reference):


    Passenger's Side(problem):

    Originally posted by Janderson
    you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.
  • rwh11385
    lance_entities
    • Oct 2003
    • 18403

    #2
    What RSM do you have? You should get another one...

    Comment

    • theox69
      E30 Mastermind
      • May 2008
      • 1732

      #3
      stock ones.
      I don't know if I should just get better ones or just get new stock ones with reinforcement plates..
      The better/stronger ones will probably last me longer...

      Originally posted by Janderson
      you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

      Comment

      • E30_fiend
        R3V OG
        • Apr 2006
        • 7348

        #4
        get either solid aluminum or at the very least polyurethane ones.






        Taylor
        Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
        Taylor- Follow me on Instagram @e30_fiend


        Comment

        • theox69
          E30 Mastermind
          • May 2008
          • 1732

          #5
          So we're 100% certain it's the RSM?

          Perfect. I'll go ahead and order AKG ones, and get a rear strut bar for reinforcement.
          How's that sound? ;)

          Originally posted by Janderson
          you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

          Comment

          • E30_fiend
            R3V OG
            • Apr 2006
            • 7348

            #6
            SOunds good!
            Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
            Taylor- Follow me on Instagram @e30_fiend


            Comment

            • rwh11385
              lance_entities
              • Oct 2003
              • 18403

              #7
              Stock ones with coilovers? LOL.

              Yes, that's a busted RSM and you should go GC or AKG or whatever.

              Comment

              • theox69
                E30 Mastermind
                • May 2008
                • 1732

                #8
                I'm going to jack the car up tomorrow morning to see what's going on under there, because it looks like my rear shock mounts are still attached to my stock shocks.
                I didn't even notice new RSM's on the new shocks so I can't wait to see what's happening -- I'll post more pics tomorrow.

                Originally posted by Janderson
                you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

                Comment

                • E30_fiend
                  R3V OG
                  • Apr 2006
                  • 7348

                  #9
                  have you replaced your trailing arm bushings and subframe bushings?
                  Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                  Taylor- Follow me on Instagram @e30_fiend


                  Comment

                  • theox69
                    E30 Mastermind
                    • May 2008
                    • 1732

                    #10
                    Nope. None of that yet.
                    I'm waiting to overhaul all that in the spring, since it's going into storage within 2 weeks.

                    Originally posted by Janderson
                    you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

                    Comment

                    • Philo
                      Ich esse kleine Kinder
                      • Oct 2008
                      • 3334

                      #11
                      It looks like the washer that sits beneath the bushing for the RSM slid off of the seat and down the shaft. It's hard to explain, so I hope you understand.
                      Attached Files
                      Last edited by Philo; 11-04-2009, 05:32 PM.
                      -tim
                      Originally posted by Jordan
                      I like the stance
                      -Coining hip terms since 10/9/03

                      Comment

                      • sticksdaman
                        R3VLimited
                        • Apr 2005
                        • 2987

                        #12
                        what coils did you end up going with?
                        Originally posted by ebelements
                        Also, for those who don't know, negative camber is the greatest thing since sliced bread(panera). Even tire wear is for city busses and the elderly.

                        Comment

                        • theox69
                          E30 Mastermind
                          • May 2008
                          • 1732

                          #13
                          A local company ;)
                          Selex.

                          Originally posted by Janderson
                          you can have the keys to my hunk of 20+ year old West German steel when you pry them from my cold dead fingers.

                          Comment

                          • E30_fiend
                            R3V OG
                            • Apr 2006
                            • 7348

                            #14
                            See now, you should have done all that stuff BEFORE the coils. that way everything is taken care of before you put the cool parts on
                            Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                            Taylor- Follow me on Instagram @e30_fiend


                            Comment

                            • Jim Lepage
                              E30 Enthusiast
                              • Jul 2008
                              • 1138

                              #15
                              Originally posted by theox69
                              A local company ;)
                              Selex.
                              Do you have some pics of your setup ? I'm from Quebec City and could be interested in a set. :D

                              Discover the latest trends in women's clothing here. Shop dresses, tops, jeans, jackets, and more from a variety of brands and styles.,Ladies, find your next favorite outfit at selexsuspension. Browse our collection of women's apparel today for up to 75% off your favorite products.
                              E30S54 - Scale Suspension / Unix Performance Coilovers - 17x8 and 17x9 BBS E50

                              Comment

                              Working...