The suspension setup/ride height thread

[TimWis]

can go lower in rear but front is all the way lowered...

[TimWis]

Ground control coilovers and some type of camber plates in front.

[dirtrider372]

What wheels are those in the updated picture?
Thanks,
Ryan

vogtland springs
KYB shocks
195 60 14 in the front
195 60 14 in the rear

*update*

new set up
205 50 15 all around on 15x7 wheels

one spring pad removed from the rears

[tfritz]

^camber and toe will be effected..

[willworkfore30s]

So I just picked up some H&R race springs.

My car is on a budget right now so I am not prepared to spend the money on Billy Sports.

I plan to get camaro gr2s for the rear but I haven't found much info on what to put under the front other than Billy Sports

So what struts should I get and what other things are going to be effected by dropping the right height?

[tfritz]

H&R race spring
no spring pads up front
GC touring camber plates
TRMotorsport C1
15x8
et20
no spacer
205/50/15 yokohama sdrive
..and FILTHY..

[SmokeE30]

Were is everyone getting their Blistein sports from?

just got a pair of fronts from bimmerparts.com for 256. they are zygmunt motors located right near me

[StandLow_Ralphy]

-Megan Racing Euro Series
-16" all around
-40 series tires

If anyone needs Megan Coilovers, feel free to contact me.

oh my goodness i love how this looks

[Akiyo]

Were is everyone getting their Blistein sports from?

[N1ght5]

thanks 4 replies, really helpful

[N1ght5]

Hello everybody.
What can you tell me about this suspension:


Car had M suspension option. Front axle for sure remained M, but rear springs obviously aren't anymore.

To me it's very similar to this case, but mine is with low front:

And this - you can't get it much higher, I guess.


Not very nice looking. I just don't know for sure what previous owner actually did to it and what actually I gotta do.

[fatphos]

-Megan Racing Euro Series
-16" all around
-40 series tires

If anyone needs Megan Coilovers, feel free to contact me.

[mr ilia]

Custom lowering springs with Stagg shocks all around. E90 spring hats with both pads in place for front and back.

[kman_e30]

my current setup
front:
gc sleeves
no name 6in 400lbs springs
cosmo adjustable plates
ge top hats
billy sports
m3 cabs
21mm vert bar
sparco replica strut bar

back:
eibach 6in 500lbs springs
no adjusters
ireland urethane subframe bushings and trailing arm bushings
billy hd's
ireland billet rear shock mounts
no rear bar

[spike68]

JOMs adjusted all the way down in front.
No adjusters in the rear.
No modification to from strut tube, still have spring perches in.





EDIT: Ill add a pic of the pan clearance. Benefit of having an m20. Decent amount of room for as low as it is.