H&R race spring part no.

[Roysneon]

I had a mix up when ordering springs and got the wrong H&Rs. I need the part number for e30 H&R race springs but it's not listed on their website. Anyone that can help a brother out?

[Roysneon]

Ok, upon some more searching I came up with 50404-88. Anyone that can confirm this?

[reelizmpro]

People neglect to mention that the H&R Race springs are listed for the E30 M3 only. They do fit other E30's though. 50404-88 They will lower an E30 M3 1.6" f and 1.5" rear, which means they'll lower a standard E30 even more.

[Roysneon]

Well shit damn. I asked for Race springs for my car (84 318i) and got the Sports which gave no real drop and didn't seem any stiffer to me. I'm hoping I can still get the sports or whatever they were sent back and get the Races that I wanted.

All I know is that I asked for Race springs and got red springs that didn't lower the car. Thanks for the guidance.

[cjbecker]

I am also looking for some springs for my 84 318i. It seams hard to find good springs for our car.

[Holland]

Well shit damn. I asked for Race springs for my car (84 318i) and got the Sports which gave no real drop and didn't seem any stiffer to me. I'm hoping I can still get the sports or whatever they were sent back and get the Races that I wanted.

All I know is that I asked for Race springs and got red springs that didn't lower the car. Thanks for the guidance.

I am also looking for some springs for my 84 318i. It seams hard to find good springs for our car.

I have an 85 318, I'm running M3 H&R Race. I don't have the number though but they sit ok, not slammed. I do have Spec E30 camberplates though so that is why I have rake.

http://www.r3vlimited.com/board/showthread.php?t=172576

They have settled a bit more since then.

[cjbecker]

I have an 85 318, I'm running M3 H&R Race. I don't have the number though but they sit ok, not slammed. I do have Spec E30 camberplates though so that is why I have rake.

http://www.r3vlimited.com/board/showthread.php?t=172576

They have settled a bit more since then.

I like the e30 m3 springs alot on your car. They sit actually where I like. I dont want anything too low. i just want a car that handles like it is on rails. I will be looking into that option.

[Roysneon]

Yeah, that looks nice. I'm swapping in an m50 so the front should be a little lower than yours. Thanks for the reference pic.

[cjbecker]

i am either thinking going h&r m3 race springs or gc conversion kit? just dont know which one to do.

[Holland]

Keep in mind I am running GC Spec camber plates, they do drop the front more.