Announcement

Collapse
No announcement yet.

Can you lower the H&R / Bilstein setup?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Can you lower the H&R / Bilstein setup?

    Just got some new wheels and the front isn't quite low enough. Is it possible to get more of a drop out of the h&r spring / bilstein setup? This set is so common among our cars that I'm hoping someone has had the same problem and found a solution. (Besides buying coilovers obviously). Thanks.
    -Joe

    #2
    e90 springhats
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment


      #3
      Drop hats, drop hats, drop hats. Keep seeing this as the most common solution on all the forums. Thanks everyone. I should've done some research before I posted my question.
      -Joe

      Comment


        #4
        e90 spring hats are drop hats and are way cheaper than custom drop hats.

        '89 Alpine S52 with goodies

        Comment


          #5
          My H&R sports and Bilstein sports that I ran for 7-8 years without a problem, now bottom out badly with the e90 drop hats installed.

          I'd look at other options if I were you.

          I'm installing the H&R Race springs from my track car into my street car for a weekend to see how they feel. I think the higher spring rate and shorter height will give me the drop desired and spring rate needed to avoid bottoming out the Bilsteins.
          85 325e m60b44 6 speed / 89 535i
          e30 restoration and V8 swap
          24 Hours of Lemons e30 build

          Comment


            #6
            JGood what's the verdict?^^
            UNDER CONSTRUCTION - 24v 325e (future DD), DD 525i


            stripped out e30 rally project - in progress
            M50NV -> M50TU E34 swap underway

            Comment


              #7
              I have H&R races with 15mm drop hats on my 24v swap car and never bottom out.
              sigpic

              Comment


                #8
                Originally posted by JJe30 View Post
                I have H&R races with 15mm drop hats on my 24v swap car and never bottom out.
                Cool, glad to hear that. I haven't had a chance to swap mine yet.
                85 325e m60b44 6 speed / 89 535i
                e30 restoration and V8 swap
                24 Hours of Lemons e30 build

                Comment

                Working...
                X