JOM Coilovers.

[Dj Buttchug]

butt chug: that is how they are to sit(you did it right)- no real need to remove spring perch except for better acceptability to the adjusters. the kit was designed to be used on the car without any modification AKA cutting off the spring perch. that way you could go back to regular coils if you wanted.

BUT...To get the front lowlow you cut off the top of the adjuster so that it is a hollow tube that slides over the strut tube and rests on the original spring perch. this method will get the front very low.

thanks for the quick reply. Thats what I was thinking as it was the only other viable option here.

all is well then!!

[CHIF8008]

i have been running my JOM's like this for quite a few months and i love it(that is, im all the way down on the adjuster). still pretty stiff.

only thing i need is shorter rear springs to get my early arches down

[Dj Buttchug]

i have been running my JOM's like this for quite a few months and i love it(that is, im all the way down on the adjuster). still pretty stiff.

only thing i need is shorter rear springs to get my early arches down

same here with the rear springs. I cut mine today and now the car is level. Im not really a huge fan of cutting springs because its not the right way to do things but all in all it worked.

Im going to replace my rear springs with something more fitting when funds permit but for now its good for daily driving

[CHIF8008]

i cut up my old stock springs to have it sit where i wanted. holy crap did it bounce. i was driving down a flat street and it felt like i was going over pot holes! i could not take it for even one day, drove back home and picked up the JOM ones and changed them out at school.

i think a 4-4.5 in spring will compliment it well. or so i have been told- still waiting on pics and info

[smokemhontas]

hey guys, in case anyone gives two shits about this thread. i have them on my car and ill post a review if theres anymore interest

[spike68]

^post your review in the "product reviews" section. There is already a thread there for the JOMs.

[CB-M3]

do people get the rear subframe toe correction kit with the JOMs?

[shiboujin]

da fuk you talkin bout

[CB-M3]

the camber/toe correction kit from IE on rear subframe.

[shiboujin]

JOMs are for the lows. Why the fuck would you want to get positive camber?

[TYBG]

i hate my joms i need to order rear springs. joms are so bouncy feels horrible and they dont even give you a nice drop in the rear. what springs are people running to fix it?

[AlpineWeissIIE30]

Bout to order some different rear springs because its too soft. most people just tell you to trash the JOM and go GC or GE engineering.

[shiboujin]

Do you guys do any research? any reading? holy fuck balls you guys are retards.

[TYBG]

Do you guys do any research? any reading? holy fuck balls you guys are retards.

Are you done yet? You need a nap kid.

[srvE30]

my slammed honda is cooler than u fuk balls