I'd like to go lower...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • M3Philipp
    Wrencher
    • Jul 2011
    • 278

    #1

    I'd like to go lower...

    I own an 1990 318is.
    Right now I'am using Eibach springs and dampers, that lower the car around 40/30.

    Now I would like to go abit lower, without buying new springs and dampers again.:down:
    Is there anything I can do about it, or is the only way by using different springs.
    I would be happy if the car drops atleast alittle more.;)

    Thanks in advance...
  • Holland
    R3V OG
    • Nov 2008
    • 7176

    #2
    You could play with spring pads or drop hats. Could always do a little snip snip on the springs too, although I wouldn't advise it on the rears.
    1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

    Originally posted by DEV0 E30
    You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

    Comment

    • FunfGan
      R3V Elite
      • Jan 2011
      • 4958

      #3
      Originally posted by Holland
      You could play with spring pads or drop hats. Could always do a little snip snip on the springs too, although I wouldn't advise it on the rears.
      Take the pads out and chop the fronts. I really would NOT advise the rears anyway hahah.


      Go here be happy!

      Ratchet Garage e30 V8 build.

      Comment

      • Holland
        R3V OG
        • Nov 2008
        • 7176

        #4
        Could always try and shrink them like a lowrider, but who knows how they would perform.
        1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

        Originally posted by DEV0 E30
        You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

        Comment

        • bmwguy325is
          E30 Fanatic
          • May 2011
          • 1262

          #5
          Ya just ditch springs all together. Just ride on the bump stops. Thats the best free mod eva. I however, wouldnt listen to me my car is not low enough by forum standards.
          sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
          The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

          Comment

          • FunfGan
            R3V Elite
            • Jan 2011
            • 4958

            #6
            Originally posted by bmwguy325is
            Ya just ditch springs all together. Just ride on the bump stops. Thats the best free mod eva. I however, wouldnt listen to me my car is not low enough by forum standards.
            Bumpstops are made rubber for a reason, they're still bouncy with no springs


            Go here be happy!

            Ratchet Garage e30 V8 build.

            Comment

            • einstein57
              R3V OG
              • Jun 2007
              • 10780

              #7
              Originally posted by FunfGan
              Bumpstops are made foam for a reason, they're still bouncy with no springs
              fixed
              Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

              www.gecoils.com
              My euro 316 project Transaction Feedback

              Comment

              • E30_fiend
                R3V OG
                • Apr 2006
                • 7348

                #8
                Originally posted by FunfGan
                Take the pads out and chop the fronts. I really would NOT advise the rears anyway hahah.
                Im with this guy ^^^^^

                There really isn't much you can do in the rear with the exception of pulling out the rear pads. At the MOST, it will lower the rear about 1/4". The spring pads are pretty thick but they ARE rubber so they compress quite a bit.


                Taylor
                Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                Taylor- Follow me on Instagram @e30_fiend


                Comment

                • FunfGan
                  R3V Elite
                  • Jan 2011
                  • 4958

                  #9
                  If the Eibachs are similar to the H&R sports(am I wrong?), you could get a pretty nice drop out of just doing all that. As E30_Fiend said, back won't go much lower, but it will still fix that reverse rake get you lower in the front!


                  Go here be happy!

                  Ratchet Garage e30 V8 build.

                  Comment

                  • E30_fiend
                    R3V OG
                    • Apr 2006
                    • 7348

                    #10
                    Naw man, the EIbachs fuggin DUMP the car. That was my first setup. H&Rs are a mild drop. Not only are they way low, they are crazy soft.


                    Taylor
                    Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                    Taylor- Follow me on Instagram @e30_fiend


                    Comment

                    • FunfGan
                      R3V Elite
                      • Jan 2011
                      • 4958

                      #11
                      Oh damn, well forget that then. You'll get low.


                      Go here be happy!

                      Ratchet Garage e30 V8 build.

                      Comment

                      • E30_fiend
                        R3V OG
                        • Apr 2006
                        • 7348

                        #12
                        OP, I suggest cutting your bumpstops so you dont blow your shocks. The eibach kit sits way too low to be that soft. Its asking for problems IMO


                        Taylor
                        Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                        Taylor- Follow me on Instagram @e30_fiend


                        Comment

                        • M3Philipp
                          Wrencher
                          • Jul 2011
                          • 278

                          #13
                          Originally posted by bmwguy325is
                          Ya just ditch springs all together. Just ride on the bump stops. Thats the best free mod eva. I however, wouldnt listen to me my car is not low enough by forum standards.
                          Has nothing to do with what I'm reading here by others.
                          But I've seen some very cool and low e30's here, and I really love that look.
                          Not talking about insane low, but lower.

                          Thanks for all the tips so far guys.

                          Comment

                          • Ant_e30
                            Wrencher
                            • Mar 2011
                            • 292

                            #14
                            Get coilovers. You're in germany so look at KW V1s or V2s if you want damper adjustment

                            Comment

                            Working...