Steering rack questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • quakerE30
    replied
    the 318ti/z3 steering racks have a much quicker ratio. they bolt right into the e30 chassis as I have one. however, you must modify the steering joint section to get it to fit to the e30 column. Though i'm not 100% certain if you must use e36 outer tie rods or e30s in conjunction with a 5lug swap. i have the rack in place but haven't bolted up knuckles yet. can anyone answer me that please???

    Leave a comment:


  • GOT8SPD
    replied
    I see people put in the e36 rack...but i read somewhere you can put the BMW Z3 rack in? How much modding do you have to do?

    Leave a comment:


  • jeffnhiscars
    replied
    Originally posted by Killacortes
    Do non airbag cars steering racks fit in airbag cars? Was planning on doing a e36 m3 rack but no luck finding any.
    The racks doesnt care how your car is equipped. The steering knuckle matters. If you have a non airbag car you will have to modify the knuckle after you buy this kit:



    If you have an airbag, the knuckle is ok, but you will probably have to open the hole in the fire wall to allow for the angle change.

    Search.

    Leave a comment:


  • Killacortes
    started a topic Steering rack questions

    Steering rack questions

    Do non airbag cars steering racks fit in airbag cars? Was planning on doing a e36 m3 rack but no luck finding any.
Working...