Announcement

**nando** · 10-20-2005, 02:56 PM

you could cut them out if there is enough slack in your springs. obviously you'd have to jack up the car..

**UNHCLL** · 10-20-2005, 03:16 PM

douse them with lighter fluid, and set them on fire while mounted to the car.

Sure fire way to get them out! ;)

**Sean** · 10-20-2005, 04:08 PM

In all seriousness, yes. The paint on your springs will scratch off a little bit though.

I don't have any pads up front.

**MR 325** · 10-20-2005, 05:24 PM

Eh, jacked it up and there's just not enough slack to rip em out.

Oh well

**2002maniac** · 10-20-2005, 06:08 PM

Use a spring compressor. Should be easier than removing the strut.

**MR 325** · 10-20-2005, 07:24 PM

Originally posted by 2002maniac

Use a spring compressor. Should be easier than removing the strut.

Good idea. I'll do that, probably next month or somethin

**MR 325** · 10-20-2005, 07:24 PM

I did pull out all of my rear spring pads today, dropped it down about 3/4 inch. Much better.

**f u z z** · 10-21-2005, 02:34 PM

spring pads are for the weak.

Can I remove front spring pads?