People with GC Camber Plates.

[f u z z]

Well i just finished my groundcontrol setup.

GC konis
GC coilovers 500/650
GC camber plates
in addition to H&R swaybars and adjustable endlinks.

My question is about the front camber plates. I am going to run a little camber, but i know for a fact i dont want to run anything over 2 degrees. The car is street driven, but not everyday because i have a daily driver, I autocross and i hope to see a track event very soon.

As of right now i am sitting at 1.5 degrees of camber, and i am wondering what everyone else is running to judge what would be the best for my application.

[Digitalwave]

If you don't daily drive the car I wouldn't be afraid to throw in a lot of camber. I've dailied my car for a long time with almost 3 degrees on all 4 corners and I don't get too bad camber wear.

[2002maniac]

I have 2.5 up front every day without any problems.

[325Projectz]

If you don't daily drive the car I wouldn't be afraid to throw in a lot of camber. I've dailied my car for a long time with almost 3 degrees on all 4 corners and I don't get too bad camber wear.

3º and you don't have bad tire wear?

[Digitalwave]

3º and you don't have bad tire wear?

When the insides were gone I probably only had about 20% of the tire left on the outside.

[f u z z]

Hmm.. i didnt know the e30guys ran so much. All of my buddies with 240s run around 2 or less, i guess i will just play around with it until i see what i like.

[Digitalwave]

[A_325i]

lol i got camber sucka



i got 2º front left 2.07º front right
2.30º rear left and 2.70º rear right i need some adjustable camber plates

[325Projectz]

When the insides were gone I probably only had about 20% of the tire left on the outside.

Thats not too bad, I would have thought you rip through tires faster.

Can you snap me a picture of the rear tire from about the door?

[Digitalwave]

lol i got camber sucka



i got 2º front left 2.07º front right
2.30º rear left and 2.70º rear right i need some adjustable camber plates

Sounds like you have something bent in the rear.

Projectz, do you mean a view of the tire if I am standing forward of it around the door?

[A_325i]

Sounds like you have something bent in the rear.

how so?

well the right rear tire's toe is way off compared to the left

[Digitalwave]

how so?

well the right rear tire's toe is way off compared to the left

2.3 on one side and 2.7 on the other.

[PeaveyBassist]

Dont forget that the bushings could also cause camber issues. Maybe not that extreme, but the trailing arm bushings would make a difference if they were real bad.

Will

[325Projectz]

Sounds like you have something bent in the rear.

Projectz, do you mean a view of the tire if I am standing forward of it around the door?

Thats it, please.

I think my car makes it look worse because of the wider fenders.

[Digitalwave]

Dont forget that the bushings could also cause camber issues. Maybe not that extreme, but the trailing arm bushings would make a difference if they were real bad.

Will

That's true, but they would have to be really torn up. It's possible though.