sway barrrr

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Not a 4 door
    Noobie
    • Sep 2012
    • 8

    #1

    sway barrrr

    Kinda new to the e30 scene... bare with me :D
    Is there a sway bar that will clear an m50 swapped e30?
    If so, where would i be able to find one????
    thanks!
    Bones would know.
  • mr ilia
    E30 Addict
    • May 2011
    • 582

    #2
    You mean strut bar? The one under the hood?

    Comment

    • Boise
      Wrencher
      • Dec 2011
      • 212

      #3
      Since the front sway bar mounts under/behind the front subframe, and your e34 m50 oil sump in front, I don't see any clearance issues with most or all aftermarket sway bars.

      Comment

      • MR 325
        Moderator
        • Oct 2003
        • 37825

        #4
        Any swaybar set should clear with no issues.
        BimmerHeads
        Classic BMW Specialists
        Santa Clarita, CA

        www.BimmerHeads.com

        Comment

        • Not a 4 door
          Noobie
          • Sep 2012
          • 8

          #5
          Ahhh thanks guys but yes... I meant strut bar haha.
          Bones would know.

          Comment

          • SkiFree
            R3VLimited
            • Jun 2011
            • 2766

            #6
            Originally posted by Not a 4 door
            Ahhh thanks guys but yes... I meant strut bar haha.

            The Sparco or Ireland Eng. bar should fit. Just be sure to check the distance between your shock towers.

            ADAMS Autosport

            Comment

            • Not a 4 door
              Noobie
              • Sep 2012
              • 8

              #7
              OK thanks! But.... when I check the distance, from what points on the towers am I measuring from?
              Bones would know.

              Comment

              • Not a 4 door
                Noobie
                • Sep 2012
                • 8

                #8
                And are we talking about this one? It looks very similar to the picture posted above.
                Bones would know.

                Comment

                • korky
                  Advanced Member
                  • Sep 2012
                  • 100

                  #9
                  Originally posted by Not a 4 door
                  OK thanks! But.... when I check the distance, from what points on the towers am I measuring from?


                  the distance between the strut towers should be 1002.2mm +/-2mm (39.5"), measured from center to center at the strut bearing opening in the inner fenders.
                  1984 bronzit 323i // Euro & M-tech 1.

                  Comment

                  Working...