PS banjo bolts

[bastianshaw]

I need part numbers for the 2 banjos that go into the rack the realoem diagram has me confused

my part supplier has them listed as 26 and 28mm which iknow is wrong


also is there just one washer on each bolt?

[jlevie]

There are two washers for each bolt. And the last time I checked the IPB is was wrong on the part numbers for one of the pair of washers. I just used generics for that one.

[jeffnhiscars]

I ordered some copper ones recently from autohausaz. Try their website

[bastianshaw]

I ordered some copper ones recently from autohausaz. Try their website

19 and 22 mm right?

[jeffnhiscars]

They are 14x20 and 16x22

http://www.autohausaz.com/search/product.aspx?sid=ikbmhp45drcyh4r1x3bawhuo&makeid=800003@BMW&modelid=1300778@325IC&year=1987&cid=26@Steering%20System&gid=7250@Steering%20System%20Nuts,%20Bolts,%20Screws,%20Washers

http://www.realoem.com/bmw/showparts.do?model=BB23&mospid=47326&btnr=32_0186&hg=32&fg=20

Its 3 & 6 although I dont know why a PN for 6 isnt showing. The copper ones are harder to find but I feel the they work better and I guess Rich (the rackdoctor) does too since he included them with the reman e36 rack he just returned to me...along with a Xmas candy cane :-)

[bastianshaw]

AHAHa! turns out I have these banjos in an old rack I had laying around, I am concernede about the washers though as only the 20mm bolt had them, there are two, do they go next to each other in between the bolt and rack?

[jlevie]

One washer goes on each side of the banjo fitting.

[SmokeE30]

Also don't re-use your old washers they will not crush down as much to seal and will leak. Last time I got all the washers to do all the banjo fittings in the entire power steering system from the dealership for like 10 bucks