Installed in our lemons racer; please excuse the needed for rules dirtyness.
Z4 3.0 steering rack 2007
Non powered steering.
Z4 coupler must be shortened as spline diameter on z4 rack is too large for e30 original coupler. Chassis side of z4 coupler directly fits e30 steering shaft and original e30 steering column pinch bolt- clearance channel will need to be drilled in the shaft to clear the bolt.
E30 . com rack mount spacers used to bolt to X . member: rest of kit un used so washers could also suffice.
Sent from my GT-N7100 using Tapatalk 2
Z4 3.0 steering rack 2007
Non powered steering.
Z4 coupler must be shortened as spline diameter on z4 rack is too large for e30 original coupler. Chassis side of z4 coupler directly fits e30 steering shaft and original e30 steering column pinch bolt- clearance channel will need to be drilled in the shaft to clear the bolt.
E30 . com rack mount spacers used to bolt to X . member: rest of kit un used so washers could also suffice.
Sent from my GT-N7100 using Tapatalk 2
Comment