Rear Adjustable Sway Bar Links - OEM Sway??

[porschelou]

Help!
We are racing a 86 325 (m30) with IE Stage 3 springs so the car sits low. The factory sways are pre-loaded because the car is lowered. I have to run OEM sways. Does anyone make REAR adjustable End Links for an OEM sway bar??? Fronts are no problem - rears can't find anywhere.

Getting ready to corner balance and really want to get our bars neutral as well. Getting ready for a 24hr race - want it to handle good.

Thanks!

[acolella76]

Ireland Engineering sells adjustable links, or if you are into penny pinching then you can make your own.

[porschelou]

Thanks. I saw there's and couldn't tell if they would only work on their bar or not. I will give them a call in the AM.

[acolella76]

OH right I forgot that the standard sway bar doesn't have eyelets on it. Hm...

[vpilarrt]

Lowering the car should not pre-load the sway bar, unless 1 side is lower than the other. Sway bars only come into play when there is a difference in height between the 2 sides, like when the car leans while in a curve.

[JGood]

You could make your own, with a typical spherical bearing on one end, and a split clamping collar on the other. You'd only need to make 1, so that would keep costs down.