Help! Pelvis turned into dust with BC Racing Coilovers

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jb325is
    replied
    Originally posted by LorenzeTorres
    8K fronts 8K rears. I’ve read that people have gone 10k-12k on rears
    8k/8k is pretty dumb. The wheel rate conversion is like .90/.48 IIRC, so multiply those #'s by your front and rear spring rates and you'll see why that sucks. There are more factors to consider, such as desired wheel frequency and weight distribution for your setup...but your front/rear split is way wrong, so start there

    Leave a comment:


  • e30davie
    replied
    The rear of e30 has a fairly large lever arm compared to the front so its not fair to compare front and rear springs wthout considering it. I thought the lever arm on the rear was like 0.67 where as the front is 0.9 or so.

    Leave a comment:


  • LorenzeTorres
    replied
    Originally posted by Jb325is
    What are the front rates? 8k is pretty soft for an e30 rear, I would guess the shock isn't well matched to that
    8K fronts 8K rears. I’ve read that people have gone 10k-12k on rears

    Leave a comment:


  • ForcedFirebird
    replied
    When you soften rebound (shock is easier to pull OUT, not compress) and take all your preload away, you are creating space between the top of the spring and bottom of perch when at droop. So, when lowering rebound, the compression gets stiffer in comparison. Combine that with floating springs and you get that big hop on a dip in the road. Try increasing rebound and just a tiny bit of preload (just enough to keep spring wedged between adjuster and upper perch). Now instead of the chassis bouncing on the top of the spring, the wheel will want to come off the ground (keeping the wheel and chassis tighter together).

    Originally posted by Jb325is
    What are the front rates? 8k is pretty soft for an e30 rear, I would guess the shock isn't well matched to that
    Not particularly unless the front to rear ratio is fubar. See the master e30 spring list below (8k is like 500lb-ish)...

    Spring---------------------Front(lb/in.)------------------Rear(lb/in.)

    Stock 325i*-----------------------106-------------------------245
    Stock 325is*----------------------118-------------------------265
    Stock 325ix*----------------------106-------------------------308
    Stock M3*-------------------------114------------------------314
    Stock M3--------------------------140------------------------250
    Dinan Sport-----------------------172-------------------------300
    H&R OE Sport---------------------180-------------------------380
    H&R Sport-------------------------180------------------------380
    H&R Sport (29664)---------------200--------------------------285
    H&R Race-------------------------315------------------------ 570
    H&R Coilovers***----------------340--------------------------380
    Eibach Pro-Kit--------------------114 --------------------------280-326 progressive
    Eibach Race----------------------160--------------------------445
    IE SIII----------------------------315--------------------------570
    Koni Coilovers-------------------342----------------------------407
    Cosmo Coilovers----------------450-----------------------------560
    Tokico----------------------------165--------------------------265
    TMS J-Stock**-------------------680--------------------------1026
    Alpina(est.)---------------------~200-------------------------~350
    FK 60/60 cup kit-----------------379----------------------------379
    Vogtland Standard***--------115/197---------------------------360
    Vogtland CS***---------------137/200--------------------------400
    Vogtland--------------------------225--------------------------360
    Intrax-----------------------------126--------------------------250
    King Springs "Low" -------- KDFL-01 220----------------KDRBL-14 440


    *= Sourced from June, 1987 article of "Motor"
    **= Alternate rates available
    ***= M3 Application

    Leave a comment:


  • Jb325is
    replied
    What are the front rates? 8k is pretty soft for an e30 rear, I would guess the shock isn't well matched to that

    Leave a comment:


  • Mike36
    replied
    Curious about this too.

    Leave a comment:


  • LorenzeTorres
    replied
    Originally posted by shootnjunky
    Why not call bc themselves?
    I shall! But I want to see if anybody here has gone through all this already.

    Originally posted by Jb325is
    Is this a coilover rear setup? Any idea on the rateS?
    This isn't a true coilover setup, where the shock and spring a separate. I'm guessing the rates are 8K rear from factory

    Leave a comment:


  • shootnjunky
    replied
    Why not call bc themselves?

    Leave a comment:


  • Jb325is
    replied
    Is this a coilover rear setup? Any idea on the rateS?

    Leave a comment:


  • Help! Pelvis turned into dust with BC Racing Coilovers

    Looking to get some advice/help regarding the ride quality on the rear of my BC's. These aren't my first set of coils, however it is my first time setting up suspension on my E30. I've never felt such bad ride quality before, which makes me wonder if something isn't set up right.

    Application: 92 Vert
    Issue: Ride in the rear feels really harsh and bouncy

    Issue occurs when:
    I feel the harsh drop when the car is coming down from a bump. It's as if the whole chassis is dropping down and there's no suspension travel.


    The bouncy-ness comes from when the road is wavy and uneven.

    What I've done so far:
    Spring is dropped to lowest with both collars on
    Raised the shock body to take pre-load off and add more travel?
    -not sure is this is set right
    -not sure if it made the situation worse or better

    Front coils are set to 14 clicks from softest
    Rear coils are set to 10 clicks from softest
    It used to be 5 click from softest and the car was too bouncy
    I'm thinking of taking the rear to 14 clicks from softest

    I'm thinking of swapping the springs out, but not if it will help with the issues or which ones to get. The springs were the stock ones that came with the kit.

    P.S. I've ran Billies and Koni's already and they didn't perform well for drifting, but they rode nice. I want to work on dialing in my current setup.
Working...