My ball joints are worn out and need replacing. I replaced the control arm bushings about 5000 miles ago with M3 CABs. They have no wear. Is it possible to reuse them by putting them on my new control arms?
Announcement
Collapse
No announcement yet.
Re-use CAB's?
Collapse
X
-
Originally posted by Jbpka06 View PostWhat is the best way to get them off?Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
sometimes old control arms are bent depending on how many potholes you hit
Originally posted by kishg View Postdoes re-using a CAB have any adverse effects on how well the arm is held in the CAB? doesnt the arm set in the CAB when you first install it? im replacing my control arms and i know the PO installed M3 CABs less than 5k miles ago. should i reuse them?
Comment
-
Originally posted by Jbpka06 View Postsometimes old control arms are bent depending on how many potholes you hit
I re-used my CABs with about 5000 on them and it was fine.
Comment
Comment