84 325e Tie Rod Replacement / home alignment??

[unibagel]

Ok, after replacing both sides (complete tierods & ends) the steering wheel is off center by like 20 degrees clockwise. I thought that I measured and set the ends correctly, guess not. Is there a home alignment procedure that I can do to set them correctly? (I used to use a tape measure on my 89 VW GLI 16v to set 1/8" toe out, but only 1 tie rod was adjustable on that car.)

Thanks!
Chris

[AlarmedBread]

Good guide here, takes time and patience to get right.

http://www.quadesl.com/miata_alignment.html

[unibagel]

Wow, that's involved!!

Good guide here, takes time and patience to get right.

http://www.quadesl.com/miata_alignment.html

[scobaru]

find out your track width and volia!

http://forums.nasioc.com/forums/showthread.php?t=1093484

I've done it this way and it isn't to bad. the concept is easy to understand and you don't need crazy special tools just a good ruler some jack stands and strings

[unibagel]

:-)

find out your track width and volia!

http://forums.nasioc.com/forums/showthread.php?t=1093484

I've done it this way and it isn't to bad. the concept is easy to understand and you don't need crazy special tools just a good ruler some jack stands and strings