16" wheel options for 325is coupe w/ 4X100

[lockeed]

Hey guys, 325is 87" here and I'm searching high and low for nice set of 16" wheels for my car in 4X100. I want to clarify that I want a "BBS" type wheel or something that will look OEM but with a more agressive offset. Ideally, I'm looking for 16X7 or 16X7.5 wheels, 8" wide is too wide for my taste and most often, the offset is too agressive as well.

I'm open to original wheels or reps, it doesn't matter to me as the car will drive about 500km a summer, or about 300 miles... My all time favorite wheels are the euro 16" M3 Basketweaves, but they're only available in 5X120...

Let me know if you guys have any ideas.

[kronus]

uncommon to see weaves in that size and 4x100. one (rare) option is ACT mesh - https://www.vwvortex.com/threads/fs-...-rare.5384403/

[Staszek]

Hey guys, 325is 87" here and I'm searching high and low for nice set of 16" wheels for my car in 4X100. I want to clarify that I want a "BBS" type wheel or something that will look OEM but with a more agressive offset. Ideally, I'm looking for 16X7 or 16X7.5 wheels, 8" wide is too wide for my taste and most often, the offset is too agressive as well.

I'm open to original wheels or reps, it doesn't matter to me as the car will drive about 500km a summer, or about 300 miles... My all time favorite wheels are the euro 16" M3 Basketweaves, but they're only available in 5X120...

Let me know if you guys have any ideas.

To get 16" Weaves in 4x100 you have three options. First is fill and drill 5x120 Weaves from another BMW model. Tons of them out there. Second option is get a 5x120 to 4x100 adapter they usually run at the smallest 18mm so you need to make sure you get the right offset on the wheels. Lastly there are a ton of companies that make Reps that look like BMW Weaves that will be 4x100. Check out ESM, the quality isnt as good but it will be one of your cheaper options.