What wheels are these?

[GotCone?]

Sorry... another thread asking the age old question... What Wheels are these?

These



and these




Thanks in advance for your help everyone!

Thanks - Jon

[Erick]

Bottom half ones look like multi-piece Alpinas. Don't know the top half ones.

[GotCone?]

thx. The top ones are what I'm most concerned about finding info on. The others I was curious about.


Would love insight on other available DTM style wheels in 4x100 (not mono-lock) in 17" diameter. It's for a project.
So far only finding Compomotive's and a couple OZ wheels available. Wish the m-systems were offered in 4x100.

[Jim Lepage]

The top ones look like my old AEZ Radon with more spokes.

[GotCone?]

what size/spec are those rears in your pic?

Thanks - Jon

[E30SPDFRK]

Mim's on top, Hardy and Beck on bottom?

[Jim Lepage]

what size/spec are those rears in your pic?

Thanks - Jon

I think they are 16x9 et15

[TDE30]

The bottom ones remind me of JongBloed 305's, but being surrounded by Alpina cars leads me to believe they are some variation of an Alpina wheel.

[GotCone?]

Mim's on top, Hardy and Beck on bottom?

can you be more specific?

Mim's.. model?

[M-technik-3]

Mim's on top, Hardy and Beck on bottom?

Ditto MIM's look like 15x7.5 with et in the E21 range which are quite popular in Germany.

http://forums.bimmerforums.com/forum...d.php?t=914917 lots of good examples in this thread of E21 wheels. The M wheels could be alpina or HB's hard to tell from such a small photo.

[e30guydownunder]

MIM 1900's on top, my wheels are in 15x7 et 13 fitment, didn't know if there were any others avaliable.

[GotCone?]

Thanks.

THey look bigger than 15" to me in the top pic... ;(

[z31maniac]

What's not DTM style about Team Dynamics Pro Race 1.2?

And they'll drill 4 x 100 and in any offset they have available. I believe the lowest offset they have for the 17 x 9 is ET 20, which would still require a spacer on an E30 for strut clearance.

Paul @ Team Illuminata quoted me around $250 shipped per wheel on the 17 x 9 57.1 hub, 4 x 100, ET 20.

There is a 6-12 week lead time since they are custom made in England then have to come across the pond.