e39 style 5's filled and redrilled???

[drulle]

Where in Western WA can I fill and redrille 5x120 to 4x100 wheels? Thanks

[e30s52]

Lots of shops do it. Just google and make a few phone calls. I think factory direct does it too.

[drulle]

Thanks, by the way, your e30 has same wheels I'm trying to put on, did you redrille them or converted to a 5 lug? Which is the best route? Thanks again

[delphini]

how costly is it to fill and redrill????

[e30s52]

I did it the right way and got e30 m3 suspension.

Trust me dont get them drilled. Find a e30 m3 suspension somewhere and use that. Then you can have a larger selection of wheels you can run.

[Philo]

E30s52 has a 5 lug swap.

Make sure the back surface of the wheels are flat. It makes it very difficult to fill and drill if it is not. About $260 seem to be average on the fill and drill.

[Gooch]

You're also going to need hub centric rings either way.

Style 5's = 74.1 mm
E30 M3 hub = 72.56 mm
E30 hub = 57.1 mm

[e30Rob]

I have a GB for custom adapters that we could make hese hub centric to the car and the wheels without needing to do a suspension swap. Check it out and see if it's something I could help you with.

Style 5's are one of my fav wheels.

-Rob

[e30s52]

You're also going to need hub centric rings either way.

Style 5's = 74.1 mm
E30 M3 hub = 72.56 mm
E30 hub = 57.1 mm

You dont need them if you have them off a e38 (7 series)