Fill/Redrill vs Adapters

[z31maniac]

Just fine on the street, probalby $150-250 depending on who does it.

[z31maniac]

dooo etttt

They are for sale, buy them.

[bad_azz_bmr]

Just fine on the street, probalby $150-250 depending on who does it.

that isn't very cheap...

plus the fact your stuck with one set of wheels, if you have the adapters you can run different wheels with the same adapters...

you can get a good set of used adapters for about $200-$250 on vortex, especially for 4x100 to 5x130 (non interfernce bolt pattern)

[george graves]

Yeah just off the top of my head, adapters let you run e36 and porsche wheels... that aint bad...

e36 is 5x120. You need a 2 part adapter for that, and then the minimum spacer size is closer to 40-50mm(?)

Would e36 wheels even work then?

[z31maniac]

that isn't very cheap...

plus the fact your stuck with one set of wheels, if you have the adapters you can run different wheels with the same adapters...

you can get a good set of used adapters for about $200-$250 on vortex, especially for 4x100 to 5x130 (non interfernce bolt pattern)

Assuming they are the correct thickness for what you need. And if you had to buy new, quality adapters approach $400 for 4.

e36 is 5x120. You need a 2 part adapter for that, and then the minimum spacer size is closer to 40-50mm(?)

Would e36 wheels even work then?

According to Matt at Adaptec, that is no longer the case.