Extended LugBolts - Any Experience with these listed?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 95///M3
    Advanced Member
    • Mar 2005
    • 181

    #1

    Extended LugBolts - Any Experience with these listed?

    UltraRev.com is available for purchase. Get in touch to discuss the possibilities!


    Running 15MM spacers all around.

    Thoughts?
  • OOMPH!
    No R3VLimiter
    • Oct 2003
    • 3487

    #2
    Damn that's pretty cheap... $0.83 each

    But I don't understand what you're actually asking, thoughts if those would work or thoughts on extended lugbolts in general?

    SOLD: My feature http://www.stanceworks.com/2012/04/a...ss-bmw-e30-m3/

    Comment

    • 95///M3
      Advanced Member
      • Mar 2005
      • 181

      #3
      Originally posted by OOMPH!
      Damn that's pretty cheap... $0.83 each

      But I don't understand what you're actually asking, thoughts if those would work or thoughts on extended lugbolts in general?
      Wanted to make sure that they would work and if anyone has actually ordered from that site before?

      Comment

      • nando
        Moderator
        • Nov 2003
        • 34827

        #4
        don't waste money on 83 cent bolts, unless you want them to fail. If you want quality, longer bolts, go with a stud kit. Not the cheap chrome ones either, get the black ones with rolled threads.

        It's not fun when 3 out of 4 bolts/studs on a wheel break. It's happened to me before, I'll never buy cheap wheel hardware again.
        Build thread

        Bimmerlabs

        Comment

        • dude8383
          Forum Sponsor
          • Jan 2005
          • 10387

          #5
          The only thing that upsets me about the stud kits available now is that you can't rock center caps with em.
          IG: deniso_nsi Leave me feedback here

          Comment

          • nando
            Moderator
            • Nov 2003
            • 34827

            #6
            it depends on if you're using spacers and how thick they are though.
            Build thread

            Bimmerlabs

            Comment

            • dude8383
              Forum Sponsor
              • Jan 2005
              • 10387

              #7
              Originally posted by nando
              it depends on if you're using spacers and how thick they are though.
              Heh, you're right, i should have mentioned that...i have 15mm spacers in the back and had to shorten my studs somewhat to get the caps to fit. The fronts are/were the shorter kit that Vorshlag used to offer.
              IG: deniso_nsi Leave me feedback here

              Comment

              Working...