Mikey's BBS RS build

[Jim Lepage]

Honestly i dont know exactly. I would guess around the +4, +8 area.

Look at this:

http://www.willtheyfit.com/index.php?width=215&aspect=40&diameter=16&wheelwidth=7.5&offset=14&width2=215&aspect2=40&diameter2=16&wheelwidth2=10&offset2=8&Submit=Submit

The inset should be the same number. At +8 it's far from that. Like I wrote earlier your final offset gonna be -18. I propose a test fit before tightening the 34 bolts cause I'm not sure 16x10 et-18 fit on an E30.

[penneroyal]

omg amazing!

Thanks homie!

[grippymonkey]

omg amazing!

[penneroyal]

Heres some shots of the inner barrels, tools I'll use to strip them and a mock up of the wheel all put together.

Heres the barrels, pretty ugly, but nothing too extreme.


Barrel 1



Barrel 2



Barrel 3



Barrel 4



Aircraft Remover. This stuff works great. 2-3 coats to remove ALL paint. The plasitc scrapers are ok, but the aircraft remover eats through them after a while.

*Do not use nitrile gloves. No protection against the aircraft remover* (eats through them quickly and burns your skin nicely)

I just brushed the aircraft remover on generously, let stand for about 10 minutes, and scraped off. I reccomend a scuff pad of some kind to assist in removal.



Complete rear mockup. Nice and wide!!



Face. Getting there..


Taking my time with this build. Barrels should be stripped and painted by friday, will post more progress.

[penneroyal]

Wait, so what's your offset going to be in the rear?

Looks good.

Honestly i dont know exactly. I would guess around the +4, +8 area.

[ak-]

Wait, so what's your offset going to be in the rear?

Looks good.

[penneroyal]

Yup it's 5.5'' inner barrel + 0.5'' center piece + 4'' lips = 10''

Just mocked them up, yup, 10" wide rear, 9" wide front.

subscribed! keep up the work michael!

Thanks Kev!

[supkev]

subscribed! keep up the work michael!

[Jim Lepage]

I will for sure, hope to make this thread a good reference thread.



Orig. 5x114



Thanks homie! I've been lurking on your build thread, super sick! Yea i havent measured yet with the barrels, but.. :
5.5 inner barrel, + 4" lip = 9.5", then you have to account for the center which is about 3/4" thick.. should be about 10"wide in the rear.

Im planning having "Tony" roll my fenders. he has an E30 and his work looks great.

Yup it's 5.5'' inner barrel + 0.5'' center piece + 4'' lips = 10''

[penneroyal]

Post up every single detail. Very nice and clean work.

I will for sure, hope to make this thread a good reference thread.

this rims is on original 5x120 or ?

Orig. 5x114

Nice but I hope you have a good fender roller. I have 16x9 et10 and 16x10 et10 and I'm pretty borderline (with rolled rear fenders).

If I'm right yours gonna be 16x9 et-5 and 16x10 et-18.

I think your front wheels can fit...

http://www.willtheyfit.com/index.php?width=205&aspect=45&diameter=16&wheelwidth=9&offset=10&width2=205&aspect2=45&diameter2=16&wheelwidth2=9&offset2=-5&Submit=Submit

...but your rear wheels gonna be a little bit tricky to fit. They're 1'' wider than mine, it's crazy !!! :)

http://www.willtheyfit.com/index.php...&Submit=Submit

Thanks homie! I've been lurking on your build thread, super sick! Yea i havent measured yet with the barrels, but.. :
5.5 inner barrel, + 4" lip = 9.5", then you have to account for the center which is about 3/4" thick.. should be about 10"wide in the rear.

Im planning having "Tony" roll my fenders. he has an E30 and his work looks great.

[325ix]

Start with 7.5, remove 1.5 (stock lips) = 6 + the new lips.

Thanks, I wasn't really thinking. Still early in the morning.

[Jim Lepage]

Isn't he at 10.5 front and 11.5 rear? They started at 7.5.

Start with 7.5, remove 1.5 (stock lips) = 6 + the new lips.

[325ix]

Isn't he at 10.5 front and 11.5 rear? They started at 7.5.

[Jim Lepage]

Nice but I hope you have a good fender roller. I have 16x9 et10 and 16x10 et10 and I'm pretty borderline (with rolled rear fenders).

If I'm right yours gonna be 16x9 et-5 and 16x10 et-18.

I think your front wheels can fit...

http://www.willtheyfit.com/index.php?width=205&aspect=45&diameter=16&wheelwidth=9&offset=10&width2=205&aspect2=45&diameter2=16&wheelwidth2=9&offset2=-5&Submit=Submit

...but your rear wheels gonna be a little bit tricky to fit. They're 1'' wider than mine, it's crazy !!! :)

http://www.willtheyfit.com/index.php?width=225&aspect=40&diameter=16&wheelwidth=10&offset=10&width2=225&aspect2=40&diameter2=16&wheelwidth2=10&offset2=-18&Submit=Submit

[bmwscaner]

this rims is on original 5x120 or ?