Flush Fitment (STANCE) Thread

[Madhatter]

^ doesnt look like you need to pull the rears, just roll? appears to be plenty of space back there with the slightly undersize tyre

Its closer than it looks in that pic. They are rolled, but the tyres have such a big rim protector on them that they rub when the suspension is really compressed too. Want to put a 235/40R17 on the rear down the track though, so need just a little space.

They are actually a little oversized.

[Npulver]

Looks good!

Test fitted the 17x9.75 rims all around with 255/40's ill post pics in the morning.

[Ant_e30]

^ doesnt look like you need to pull the rears, just roll? appears to be plenty of space back there with the slightly undersize tyre

[Madhatter]

17x8.5 ET20 all round. 215/45R17's.



Rear has settled a little more since driving it yesterday. 8mm spacers coming for the front to give plenty of clearance to the lower spring perches on the coil overs. Debate if I run them on the rears too and pull the guards a little.

[Npulver]

Posting my over posted POS to bump this thread. Test fitting some 17x9.5 +25 today. See how well that goes. Will post pics if its decent.

[lovinmye30]

^ like the setup on your gold e30. specs?

[FunfGan]

I rike.

[d_elson0]

[srgfqgarhwfascweabvs]

Anyone know where I can find hub centric rings and what size the e30 hub centric rings are?

The bore is 57.1mm

['89e30]

Anyone know where I can find hub centric rings and what size the e30 hub centric rings are?

[HR2L]

white balance way off. looks like a floating space ship. cant even make out the style of wheel

sorry, it was taken on my blackberry. oh and it shows up just fine on my computer, but thats because I have a laptop and i can move my screen. ;)

[B-well]

Anyone running RS's or something in 15x8 et0?
I'm having a really hard time decing wether to go 8" all round or 7.5" (et6 I guess) fronts because I don't like when the front pokes too much.

look at the xxr 002. they come in those sixes and a million people have done it already.

[B-well]

HR2L IMAGE

white balance way off. looks like a floating space ship. cant even make out the style of wheel

[Fusion]

Anyone running RS's or something in 15x8 et0?
I'm having a really hard time decing wether to go 8" all round or 7.5" (et6 I guess) fronts because I don't like when the front pokes too much.

[HR2L]