Ever seen wheels drilled like this?

[CrusherCurtis]

Who told you that fairy tale??!!
Ari and his shoddy shop are low life scum that feed off noob owners like yourself and the OP.

I don't have 5'000 posts, but I'm not a noob bruh.

[Teaguer]

I don't have 5'000 posts, but I'm not a noob bruh.

If you are happy spending your money on those "new" wheels and then are content driving on them then yes you most definitely are the epitome of a "noob". Bruh.

[accident]

What Teaguer said. Times 100.

[CrusherCurtis]

Dude if you would have read by posts you have have read that I said I'm definitely not happy with the drill. He's in California, I'm Chicago. I'm going to bitch about it and try to send them back and make a scene a big scene out of it. Things like calling the man scub etc. That shits just childish. I bought them, now I have to deal with it. The wheels were only $1000 dollars so its no big deal. I'm going to just have them filled in the spring. I don't track it, I don't autocross, I don't even drive fast (hardly drive it all). The wheels look good:



I'm just not the type to make a big fuss over something that will probably cost me $100 to fix.

Please don't call me noob (unless you mean noob to posting on the forum), I've had like 10 BMW's. I just don't have the time to put up 5000 posts sorry.

[e30trooper]

still 1000bux for esm's and wrong lug pattern = fail. There should have been a huge discount since you needed 4x100.

[CrusherCurtis]

I made the mistake of not considering what 5x100 + 4x100 pattern would look like. When he said it was common I assumed it would look like any other wheel that had dual drills. I thought It would just help me when it came time the sell em. My mistake. Don't call me a noob for not calling the man the scum of the earth and demanding a refund. I made my bed now I'm going to lie in it.

[e30trooper]

I made the mistake of not considering what 5x100 + 4x100 pattern would look like. When he said it was common I assumed it would look like any other wheel that had dual drills. I thought It would just help me when it came time the sell em. My mistake. Don't call me a noob for not calling the man the scum of the earth and demanding a refund. I made my bed now I'm going to lie in it.

Im just saying , Ary of ESM , should have giving you some sort of discount for not having a correct lug pattern in stock.

[CrusherCurtis]

They did the drill fore free and if I had known I'd end up filling them, I'd have definitly asked for a discount. At time I thought the wheels would just have 9 holes spaced neatly under the cap. I was wrong.

BTW I'll let you guys now when the wheels shake, rattle and role off the car. :D

[e30trooper]

They did the drill fore free and if I had known I'd end up filling them, I'd have definitly asked for a discount. At time I thought the wheels would just have 9 holes spaced neatly under the cap. I was wrong.

BTW I'll let you guys now when the wheels shake, rattle and role off the car. :D

k take pix when the wheels r3v

[markseven]

I am speechless. Zero engineering, craftsmanship or common sense. Even at $2.50 a pop I would not run those. TireRack and 18Racing have cheap, light rims for about $100 each. Or BCs for $100 total. Get something else ASAP.

[lonestar22]

I know! It's one thing to do this to factory wheels...I don't care if they say BBW of fooundu (spelling?) on them either. They all would be made to BMW's specs, and TUV approved.

It's a totally different thing to do this with cheap Chinese wheels.

OP, if you have wife and kids, now might be a good time to up your life insurance policy.

lol @ the fact that you think BMWs wheels are "high quality"

maybe the older BBS's, but theyre wheels now days just crack and break into pieces way worse than any "chinese wheels"

[cale]

Call awry and ask him yourself. I'm not the happiest about it, but he did say it would be fine and its common and so that has held true

This is the same kind of "logic" the guy in recent FS thread with shotty redrills used to, the shop told him it was safe so he thinks it's safe. What knowledge of metallurgy and mechanical engineering does Ary have? Oh wait, he flog's knock-off chinese made parts online. Putting any trust in this guy when it's in regards to your safety is ridiculous and I'm quite shocked you're naive enough to take his word that they're safe. Give your head a shake, get your money back or get them properly filled.

[shiftbmw]

That is absolutely not safe.

[cale]

What a shock, people with non-existent budgets keep this joke afloat who keeps flogging absolute junk. Why the r3v mod's and admin's allow this guy to continue advertising is beyond me, he's taken part in enough questionable business and products that he should've been gone long ago.

http://www.r3vlimited.com/board/showthread.php?t=233706