If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
so im about to pull the trigger on a set of 16x8 bbs mahle for $120 but the bolt pattern is 5x112. i believe the offset is 20. will this be crazy poke with 4x100-5x112 adapter? fill and drill is not an option.
probably. any 4 to 5 lug adapter comes in 18mm at the thinnest. thatll put you at an et of +2... most would consider that offset to low although i ran et0 all around and it didnt poke
Turbo M42 Build Thread :Here Ig:ryno_pzk I like the tuna here.
Comment