Wheels falling off...help

[Nsquared97]

Are those even hubcentric/do you have hubcentric rings? Most Honda 4-lugs are 56.1mm centerbore, E30 is 57.1mm. And are the OEM lug bolts long enough? Could be that the wheel is too thick and you not getting enough threads into the hub.

[_r2h]

What are you torquing them to? needs to be 85-90'ish lb/ft I believe.

[ak-]

A protein shake.

[tomwas]

Got these from my neighbors 90's Civic, 17 in Konigs with 225 40 mismatched rubber.... Went down the road to try them out after swapping them on and started getting serious looseness and got back home to check it out and ended up with 1 lug out of the 4 left holding the left front rim on (just barely)..... one lug got stripped, retightened all 4 wheels as they all got loose, took it less than 1/4 mile down the road and could hear and feel them loosening again, I used my stock BMW lugs and no spacers, what do I need to do to get them to stay on the car.... Thanks