If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is the hub bore of the wheel bigger than the E30 hub? If yes, you need rings
Is the hub bore of the wheel the same as the E30? If yes, you DONT need rings
Ok... for those that might be somewhat ....."challenged".
Is the MOMO 15x7 Star KNOWN to require hubcentric rings? I have them mounted. They seemed to fit fairly tight on the front hubs, but the rear hubs seemed to be smaller than the wheel hub diameter. Doesn't make sense, I know, ....hence my question does anyone KNOW if they require rings. Was kind of dark when I mounted them and eh,...if their off it isn't by much. Car drove ok, but still... inquiring mind wants to know.
Ok... for those that might be somewhat ....."challenged".
Is the MOMO 15x7 Star KNOWN to require hubcentric rings? I have them mounted. They seemed to fit fairly tight on the front hubs, but the rear hubs seemed to be smaller than the wheel hub diameter. Doesn't make sense, I know, ....hence my question does anyone KNOW if they require rings. Was kind of dark when I mounted them and eh,...if their off it isn't by much. Car drove ok, but still... inquiring mind wants to know.
DUDE.
MOMO made all kinds of center bores to fit all kinds of cars. Unless you know these were made for an e30, then you need to take a micrometer to the center bore of each wheel. The hubs on an e30 are 57.1mm, so, by that logic, what alex said is true.
No one in this thread is "challenged" except for you.
Comment