Pics and suggestion request

[2l2ltq]

Well that sucks... i guess unless someone else gives me some hope or a good example of what they have that is close I am going to scratch this idea.

[lambo]

Nooooooooooooooooooooooooo

Does that car have any spaces at all?

Well, by nature, rear salad shooters are 16x9.5 et38 and he has 25mm adapters in the rear. Therefore he has an effective offset of 13mm. With a hard roll and pull you might be able to pull it off.

[2l2ltq]

Nooooooooooooooooooooooooo

Does that car have any spaces at all?

[lambo]

Turns out that, with adapters, the rears on that red car are 16x9.5 et13. So, et0 is gonna be quite aggressive haha.

[2l2ltq]

Thanks man. That makes me feel better about the offset on the rear as the dude from ccw was saying that it would not work... but i dont think that he was thinking of the extremes that i was looking for.

[lambo]

Yeah they look a little taller then what i am going for. But those wheels are square right and not staggered? And going to send mr mystikal a pm shortly. Thanks for all the help.

Afaik I think those are the 8.5/9.5 staggered setup

[2l2ltq]

I can't say for sure, try asking Mystikal.

However, these are 9.5's that are nearing et0







I wanna say those are 205/45's though.

Yeah they look a little taller then what i am going for. But those wheels are square right and not staggered? And going to send mr mystikal a pm shortly. Thanks for all the help.

Depends on the wheel backspace. My 17x9's in the front would never have fit a tyre under there with the stock struts. With the coilovers they cleared by like 3mm.

I have bc coils so I am not as much worried about that end of the wheel as i am about the fender.

[Madhatter]

Depends on the wheel backspace. My 17x9's in the front would never have fit a tyre under there with the stock struts. With the coilovers they cleared by like 3mm.

[lambo]

I can't say for sure, try asking Mystikal.

However, these are 9.5's that are nearing et0







I wanna say those are 205/45's though.

[2l2ltq]

Do able or would that need a lot of fender love

[lambo]

16x9 et6 in the front should be just about perfect. Might need a small spacer to clear the strut, maybe. 16x9.5 et0 sounds mighty aggressive... I would think some fender lovin' might be needed.

[2l2ltq]

Ok. So I will ask one last question about fitment to the e30 guys i swear hahaha.

Here it goes....

I am currently looking at picking these wheels up off a local guy. The specs on the wheels are as follows

CCW LM 20′s 16×9 + 6 16×9.5 + 0 fully polished with gold arp hardware
3.5 lip front 4inch lip in rear
205 40 f and 215 40 r



What would I have to do to make these work on my end. I am sure that i would have to adjust camber and already assumed that. But will these fit or would i also be looking at spacers and all that.

And also do you guys have any photos is e30s with this set up? Or suggestions on if they will fit